Material Selection
SDM is proud to offer a wide variety of materials for your plastic injection projects. Please see below for a list of plastic injected resins. This list is by no means exhaustive so please feel free to contact us with questions regarding whether the material of your choosing is applicable.
​
Please note that there are many grades and combinations of materials that can occur from this list. Please call the manufacturer of the specific resin type in order to get a recommendation for the material and grade that is correct for your specific application.
ABS (Acrylanitrile Butadiene Styrene)
ABS Polycarbonate Alloy
Acetal
Acrylic
ASA (acrylic-styrene-acrylonitrile) Alloys
Cellulose Butyrate
ETFE (Tefzel)
EVA Ethylene Vinyl Acetate
LCP (Polyester Liquid Crystal Polymer)
Nylon 6
Nylon 4-6
Nylon 6-6
Nylon 11
Nylon 12
Nylon amorphous
Nylon impact modified
Polyallomer
PBT Polyester (Polybutylene Terepthalate)
Polycarbonate
PEEK Polyetheretherkeytone
PEI Polyetherimid (Ultem)
Polyethersulfone
Polyethylene High Density
Polyethylene Low Density
Polyethylene Medium Density
PET Polyester (Polyethylene Terepthalate)
Polyimide Thermoplastic (Aurum)
Polypropylene
PPA Polyphthalamide (Amodel)
PPO Modified Polyphenylene Oxide (Noryl)
PPS Polyphenylene Sulfide
Polystyrene Crystal
Polystyrene High Impact HIPS
Polystyrene Medium Impact MIPS
Polysulfone
Polyurethane
PVC Polyvinyl Chloride Rigid
PVC Flexible
PVDF Polyvinylidene Fluoride (Kynar)
SAN Styrene Acrylonitrile
TPE Thermoplastic Elastomers
TPR Thermoplastic Rubbers